Care & Maintenance

care-maintenance

Granite

Although granite is a relatively non porous material and has a high resistance to staining, it is nevertheless slightly porous and can stain if exposed to spillages of acidic or coloured substances. In order to further minimize the risk of staining we treat all our granite surfaces before it leaves the factory and again on site after installation. We recommend that for normal household usage granite tops should be re-treated every 12 months using Lithofin Stain Stop. The product is applied using a clean cotton cloth remembering that one should only apply as much as the material will absorb. Once dry buff out the surplus sealer residue with a clean dry cloth.

care-maintenance

Marble

Marble is more porous than granite and although every bench top is treated twice with a sealer to minimize the risk of staining, care must be taken to wipe any spillage immediately before it breaks down the sealer and makes the surface more vulnerable to staining. As with granite we recommend that for wet areas e.g. vanity tops, re-sealing every twelve months with an appropriate sealer such as Lithofin Stain Stop. In kitchen applications we recommend re-sealing every 6 months.

care-maintenance

Regular maintenance of Marble & Granite

Regular maintenance in the form of periodic washing with warm, clean water is all that is required to keep your bench top looking like new. If necessary to use a detergent, it is important that it be a neutral product like phosphate free biodegradable liquid dish soaps.

care-maintenance

Reconstituted & engineered stone

These products, such as Omega Quartz, Caesar Stone and Essa Stone, are quartz based and are virtually non-porous. As such, sealing is not required. Regular maintenance is the same as for marble and Granite. Sealer & Cleaning products. The products we recommend are: Lithofin Stain Stop Lithofin Easy Clean Lithofin Power Clean Lithofin Oil-Ex and Lithofin Polish/Care Cream These are available at our showrooms: 14 Westchester Road, Malaga. Please note that the sealing referred to above deals specifically with the porosity of marble and granite to minimise the risk of staining, and does not actually guarantee that staining will not occur. Sealing will not provide protection against scratching, abrasion or attack from acidic substances.